Window tinting in Riga and within a 50 km radius • We reply within 5 minutes of your enquiry

Window film prices in Riga

A complete price list for every type of window film for buildings, plus an explanation of what makes up the price and how a square-metre rate turns into a total. Below you'll find three real worked examples with all the arithmetic.

Film + labour included
Prices excl. VAT
Minimum order €75
Free on-site measuring
💶
Four things to know before you read the price list
1. All prices are excl. VAT.
2. The price includes both the film and the labour - there is nothing extra to pay for the installation.
3. The minimum order is €75, even when the area to be covered is small.
4. All prices are "from" prices. The final total depends on the size of the glass, the number of windows, access, working height and the amount of offcut waste.

Prices by type of film

Prices are per square metre of glass covered. The names link through to the relevant service page, where we explain where each film works well and where it doesn't.

ServicePriceWhere it is typically used
Solar control film / heat rejection filmfrom €25/m²South- and west-facing windows, roof windows, glazed terraces
Mirror filmfrom €25/m²Daytime privacy plus partial reflection of solar heat
Frosted filmfrom €25/m²Sandblasted-glass effect: the light stays, the view disappears
Blackout / privacy filmfrom €25/m²Complete privacy in bathrooms, ground floors and consulting rooms
One-way vision filmfrom €25/m²A mirror from the brighter side, see-through from the darker side
UV protection filmfrom €25/m²Protecting furniture, parquet, fabrics and stock from fading
Thermal insulation filmfrom €25/m²Improving the heat balance of the glass all year round
Safety film, standard (4 mil)from €25/m²Holds shards together on ordinary glazed surfaces and doors
Safety film, reinforced (8 mil)from €35/m²Large shop windows, entrance areas, higher requirements
Safety film (12 mil)from €41/m²The thickest option, where breaking the glass must be made as hard as possible
Patterned decorative filmfrom €29/m²Patterns, bands, zoning and design on glass
Logo / graphics on glassindividual quoteCut logos, company name, opening hours, full shop window graphics
Glass partitionsindividual quoteFrosting for office partitions, manifestation bands, design
Old film removalfrom €8/m²Removing old, yellowed or bubbled film and its adhesive

Prices are shown excl. VAT. The price includes the film and the installation work. Minimum order €75. The figures shown are starting prices: we confirm the final price after free on-site measuring.

How a price per m² becomes a total

The calculation itself is simple: the area of glass to be covered multiplied by the price per square metre. Working out the area correctly is the trickier part, so here are three typical examples with the full arithmetic.

Example 1: living room, 3 windows

An apartment in Purvciems, south-west facing, where the room overheats in the afternoon. Three identical windows, each 1.6 m wide and 1.7 m high. Solar control film chosen.

  • Area of one window: 1.6 × 1.7 = 2.72 m²
  • Three windows: 2.72 × 3 = 8.16 m²
  • Price: 8.16 m² × €25/m² = €204.00

Around €204 excl. VAT in total. Comfortably above the minimum order, so the €75 threshold has no effect on the figure here. The job is a few hours' work for one installer.

Example 2: office meeting room

An office in central Riga. A glass wall onto the corridor that needs privacy: 6 m long, 2.0 m high. Frosted film chosen.

  • Glass wall: 6.0 × 2.0 = 12.00 m²
  • Price: 12 m² × €25/m² = €300.00
  • If patterned decorative film is chosen instead of plain frosted: 12 × 29 = €348.00

€300 excl. VAT in total for frosted film, or €348 with a pattern. At this size the difference between the two options is €48, so the design choice is rarely decided by price.

Example 3: shop window

A shop with two display windows, each 5 m wide and 2.0 m high. The job is both to protect the stock from fading and to hold the shards together if the glass is smashed. Reinforced safety film chosen.

  • One display window: 5.0 × 2.0 = 10.00 m²
  • Two display windows: 20.00 m²
  • Price: 20 m² × €35/m² = €700.00
  • If standard safety film were enough: 20 × 25 = €500.00

€700 excl. VAT in total. Here the choice of thickness changes the figure by €200, so before deciding we talk through whether the site really needs the 8 mil grade.

How to work out an approximate area yourself

Measure the glass, not the window frame. For each window, multiply the width of the visible glass by its height in metres and add all the windows together. If a window has several panes separated by a frame, each pane counts separately, because the film is cut individually for each one. Accuracy to a tenth of a metre is perfectly adequate for an initial estimate. If you get it wrong, we'll correct it when we measure.

For example: one kitchen window of 1.4 × 1.5 m and two bedroom windows of 1.2 × 1.5 m each. That is 2.1 + 1.8 + 1.8 = 5.7 m². At €25/m² that comes to €142.50 excl. VAT. That figure is close enough to tell you whether the solution fits your budget.

What pushes the price up

  • Lots of small panes. Twenty little panes take far longer than one large shop window of the same total area, and they generate more offcut waste.
  • Unusual shapes. Triangular, arched or sloping roof windows have to be cut to a template, and the proportion of waste is higher.
  • Height and access. Working from ladders, over furniture or in tall rooms is slower and needs extra equipment.
  • Old film on the glass. Removal from €8/m² is added on top, and for old, baked-on film that is time-consuming work.
  • Thicker safety film. Moving from standard to reinforced or 12 mil film changes the square-metre price by €10 to €16.
  • Work outside normal hours. In shops and offices where the film can only be applied after closing, the schedule has to be planned separately.

What brings the price down

  • Large, rectangular panes. Simple geometry means faster work and less waste.
  • Everything in one visit. If we cover a whole apartment or a whole floor at once, the travel and set-up costs are spread over a larger area.
  • Clear access to the glass. If there are no heavy pieces of furniture or stock shelves to move away from the windows, the work goes more smoothly.
  • The same film throughout. One material for every window is cheaper than several different types in small quantities.
  • Clean, undamaged glass. If the glass is sound and has no old film on it, preparation takes less time.
  • Flexible timing. If the job can be slotted into a free day rather than a fixed date, the schedule is easier to arrange.
Installer measuring an apartment window with a tape measure before applying film

Film versus replacing the glazing unit

When a room is too hot, or a ground-floor flat has no privacy, the other possible solution is to change the glass or the whole window. Example 1 above makes a useful comparison: three windows, 8.16 m², film for €204. Replacing the same area with selective glazing units costs several times as much, requires dismantling work, takes longer and leaves building waste behind.

Film is not a substitute for new windows in every case. If the windows are worn out, draughty or no longer open, film will not fix that. But if the windows are in good working order and the only problems are heat, glare, ultraviolet radiation or being overlooked, film solves exactly those problems for a fraction of the cost of replacement.

How the individual types of film differ and which one suits which job is compared on the types of window film page. You'll find the full list of services with descriptions in the services section.

The practical side

Free on-site measuring

Measuring at the property and preparing a quote are free and without obligation. If you decide not to go ahead after the measuring visit, there is nothing to pay.

The price is fixed before work starts

The figure we give after measuring is the figure we work to. If anything unexpected comes up during the job, we agree it with you before continuing.

Riga and a 50 km radius

We work in every district of Riga and across Greater Riga: Jūrmala, Mārupe, Ķekava, Salaspils, Ogre, Ādaži. See the full list on the service area page.

Get a quote for your own windows

Tell us the approximate area and the type of property. We'll call you with a price per m², an approximate total and a recommendation on which film suits your situation best.

✅ We will contact you within 5 minutes

By submitting this form you agree to our privacy policy

Questions about prices

No. Every figure on this price page is excl. VAT. For a private customer that means the final invoice will be higher by the VAT rate, and we always state this clearly in the quote so there are no surprises. For VAT-registered businesses the figure excluding VAT is usually the more convenient one to work with, which is why it is shown as the headline price.

The price covers both the film and the labour. That means the material, preparing and cleaning the glass, cutting the film to size, applying it, finishing the edges and tidying the work area afterwards. We do not charge separately for installation or for travel within the Riga city limits. On-site measuring before the work is free as well.

Because the real cost of a square metre varies from site to site. Ten square metres in one large shop window is a simpler job than the same ten square metres split across twenty small panes, each of which needs its own cut and creates more offcut waste. The price is also affected by the type of glass, the floor, access, and whether the windows open easily. That is why we give a final price after measuring.

Every visit involves travel, preparing materials and setting up tools, whether we are applying one square metre or ten. The €75 minimum order covers those costs. In practice it means that for a very small job it pays to combine several windows into one visit, because the additional square metres are charged simply at the square-metre rate.

The initial estimate based on the form is approximate, because it uses the area you have given us. After free on-site measuring we give a final price, and that is the price we work to. If measuring reveals that the actual area or the conditions differ significantly from what was originally described, we say so immediately and before the work starts - not on the invoice.

From €8/m². This is added to the price of the new film if there is already old film on the glass. The effort involved in removal varies enormously: relatively new film can often be pulled off in whole sheets, whereas old film that has baked in the sun tears into tiny pieces and the adhesive has to be removed separately. That is why we confirm the removal price once we have seen the condition of the film.

Want an exact figure rather than a “from” price?

Fill in the form and, after free on-site measuring, we'll give you the final price. Free and with no obligation.

Get a quote →
Get a free quote →